CLEAR POLY TOPCOATS
#1057 DECOFINISH
ALIPHATIC URETHANE – GLOSS – 57% SOLIDS
DecoFinsish #1057 is an extremely high gloss, clear, 57% solids, two-component aliphatic urethane coating.
DecoFinish #1057 provides excellent chemical and abrasion resistance while providing superior gloss retention.
DecoFinish #1057 is a perfect coating for interior or exterior applications where the finished surface may be exposed to high wear abrasion and ultra-violet light.
PACKAGING & COLORS
Kit sizes are available are 1,2, 10 gallons
USES / APPLICATIONS
57% solids extremely high-gloss aliphatic urethane
ADVANTAGES
- Water-clear formulation
- Excellent abrasion resistance
- Easy 1 to 1 mix ratio
- Excellent UV stability
- High-Gloss formulation
DATA SHEET
LIMITATIONS
- Do not apply directly to concrete
- Do not apply in conditions with high humidity
- Do not apply directly to wood
- Do not apply at a thickness greater than 4 mils (400 sq. ft./gal)
- Avoid allowing “puddling” during application
- Contains solvents and must be used in areas that are properly ventilated
APPLICATION INFO
Surface Preparation: New concrete must have a 28-day cure and be applied to a clean/sound substrate that is free of laitance and curing compounds. Mechanical preparation by means of shot-blasting or diamond grinding to a minimum of a CSP 2/3 as defined by ICRI, then properly vacuumed to remove any remaining dust
Mixing: Mix both components for approximately 2-3 minutes. CAUTION: if mixing solvent-based products with an electric drill, sparks may ignite solvent odors. Whenever possible use a battery-operated cordless drill.
Applying Product: The “dip & roll method appears to yield the greatest success, using a non-shed 1⁄4” nap Mohair roller cover, do not let material puddle as white spots may occur.
Back roll the material in the opposite direction of how it was squeegeed onto the surface. DO NOT TURN THE MIXING VESSEL (BUCKET) OVER ON THE FLOOR IN AN EFFORT TO UTILIZE THE ENTIRE CONTENTS.
Typical Coverage will be between 400 square feet per gallon. This will vary depending on the surface to which the mixed product is applied.
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.