RESURFACERS & TOPCOATS
#755 NOVOCLAD
NOVOLAC CHEMICAL RESISTANT COATING
A two (2) component 100% solids Novolac epoxy coating designed and formulated specifically for projects that require protection from harsh chemical attack that may cause standard coatings to fail. The #755 NOVOCLAD is an ideal product for primary and secondary chemical containment, battery charging and storage areas, solvent storage, process areas, pump pads, and trenches.
#755 NOVOCLAD can be installed as a self-priming coating, or when properly mixed with various aggregates such as silica sand or thixotropic thickening agents, is suitable for high-build flooring (mortars), and/or wall systems, ensuring total chemical protection.
PACKAGING & COLORS
Available in 1 & 5 gallon kits. Available in all standard Thermal-Chem colors.
ADVANTAGES
- Superior chemical protection
- NO offensive odors typically found with styrene or solvent-based coatings
- Can be installed in both interior and exterior environments
- USDA approved
- Withstands higher heat exposures than typical coatings
- Thicker viscosity to ensure total protection
- Excellent working time to aid in placement
USES / APPLICATIONS
- An acid/solvent chemical resistant coating
- A great choice for battery charging areas
- A great choice for primary and secondary containment areas
DATA SHEET
LIMITATIONS
- Do not install in temperatures below 40°F
- Only available in normal cure
- Do not thin this product
- Lighter colors may require 2 (two coats)
APPLICATION INFO
Pre-drill both components for 2-3 minutes to ensure ingredients and pigment (if selected) are evenly dispersed throughout the mix. Combine both components and mix for an additional 3 minutes.
Apply #755 NovoClad with a squeegee, brush, or high-quality non-shed roller. Only mix the amount of product that can be properly applied in 20-30 minutes.
SURFACE PREPARATION – Apply #755 NovoClad only to a clean and sound substrate. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 3/4 is recommended (see ICRI Guideline No. 03732 for additional details)
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.