SPECIALTY COATINGS
#726-CV COVE KIT
EPOXY COVE KIT USING 100% SOLIDS EPOXY. COVERS 23 LF OF 4″ COVE
#726-CV was designed to provide a unique combination of lower viscosity, cyclo-aliphatic resin, along with a thixotropic agent, to provide an easy-to-use mixture to be used in vertical applications such as cove base.
This mixture allows for more working time, is easier to trowel, and has less sag than traditional epoxy/sand cove mixes.
SYSTEM FEATURES
- 100% solids formulation
- Higher viscosity when components are mixed to prevent sag
- Extremely durable
- Used in 1” cant/cove, 4” and 6” traditional cove base installs
- Adequate “open” time to allow for easier install
APPROX. COVERAGE
- 23 l.f. 4” cove base
- 15 l.f. 6” cove base
- 30 l.f. 1” cant/cove base
DATA SHEET
APPLICATION INFO
Surface Preparation: New concrete must have a 28-day cure and be applied to a clean/sound substrate that is free of laitance and curing compounds. Mechanical preparation by means of shot-blasting or diamond grinding to a minimum of a CSP 2/3 as defined by ICRI, then properly vacuumed to remove any remaining dust.
Priming: When the surface has any porosity, we recommend that you apply a thin coat of the #726 to wet out the surface.
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.