Restoration / Joint Repair
Thermal-Chem’s line of concrete restoration projects permanently repair deteriorated and damaged concrete. These repair products are 100% solids and contain zero VOC’s.
Patching & Grouting Material
- 3 Mortar Resin: A versatile 100% solids medium modulus epoxy resin when combined with aggregates create a non-shrink mortar for patching, grouting and overlay applications.
- 3VO Mortar Resin Vertical & Overhead Patch: An epoxy repair material designed for vertical and overhead repairs.
- M3 Mortar Resin MM: An epoxy polymer concrete developed to structurally repair and patch damaged concrete and concrete structures.
Bonders & Adhesives
- 4 Bonder: Moisture insensitive adhesive designed to permanently bond concrete to other substrates.
- 5 Wet Concrete Bonder Non-Sag: A moisture insensitive epoxy adhesive designed to bond new concrete to old concrete on a vertical surface.
- 501 Wet Concrete Bonder LV: A moisture insensitive epoxy adhesive formulated to bond fresh, new concrete to old concrete on a horizontal surface.
- 502 Wet Concrete Bonder VS LV: A slow cure moisture insensitive epoxy adhesive designed to bond freshly mixed concrete to old hardened concrete on a horizontal surface.
- 503 Wet Concrete Bonder Non-Sag VS: A slow cure moisture insensitive epoxy adhesive designed to bond freshly mixed concrete to old hardened concrete on a vertical surface.
Crack Repair
- 120 Injection Foam: A hydrophobic polyurethane injection resin for sealing non-structural cracks in concrete to prevent moisture migration.
- 2 Injection Resin: A low viscosity epoxy injection resin used to structurally repair cracks up to 3/16″ wide.
- 201 Injection Resin Gel: A low viscosity epoxy injection gel used to structurally repair wide cracks up to 1/4″ wide.
- 207 Hairline Crack Sealer: A low viscosity epoxy resin system designed to penetrate and bond small hairline cracks in concrete.
- 212 High Temperature Injection Resin: A low viscosity epoxy injection resin that can withstand continuous heat up to 500° F and is used to structurally repair cracks up to 3/16″ wide.
- 213 High Temperature Injection Resin Gel: A low viscosity epoxy injection gel used to structurally repair wide cracks up to 1/4″ wide and is resistant to continuous temperatures up to 500° F.
- 413 Surface Seal: A fast cure creamy smooth epoxy paste adhesive for use as a crack injection surface. Can be used on damp surfaces and is relatively easy to remove.
Joints
- 102 FlexGard 125 Gel: Flexible resin gel used for filling vertical cracks and control joints.
- 108 FlexGard J: A medium viscosity, low modulus flexible resin for filling non-load bearing cracks and control joints.
- 109 FlexGard J Gel: A gel viscosity, flexible (125% elongation) resin for filling non-load bearing vertical cracks and joints.