CLEAR EPOXY TOPCOATS
#748 DECOTOP
Most Popular Clear Epoxy – 100% Solids with Good UV Resistance
DecoTop #748 is a two (2) component, 100% solids, low viscosity, water-clear epoxy that is specifically formulated to be a high-performance, intermediate, or topcoat for DecoFlake and DecoQuartz flooring systems.
This proprietary formulation produces superior clarity, excellent resistance to ultraviolet (UV) light exposure, and higher gloss retention when compared to general-use epoxy products.
DecoTop #748 is recommended for interior applications.
PACKAGING & COLORS
Kit sizes are available are 1, 3, 15 gallons
ADVANTAGES
- Water-clear formulation
- Excellent resistance to chipping/dings due to its elongation properties
- High gloss finish that is easy to maintain
- Easy 2 to 1 mix ratio
- 100% solids-no odor formulation
- Superior clarity
- Excellent wear durability
USES / APPLICATIONS
A 100% solids epoxy top coat with very good UV stability
DATA SHEET
LIMITATIONS
- Do not thin this product with any solvent
- Do not apply to a substrate below 55 Degrees F
- Limit exposure to harsh chemicals
APPLICATION INFO
Surface Preparation: New concrete must have a 28-day cure and be applied to a clean/sound substrate that is free of laitance and curing compounds. Mechanical preparation by means of shot-blasting or diamond grinding to a minimum of a CSP 2/3 as defined by ICRI, then properly vacuumed to remove any remaining dust.
Mixing: Pre-mix both components separately for approximately 1-2 minutes. Combine both components and mix an additional 3 minutes at a low to medium rpm.
Applying Product: Pour product into “ribbons”, then spread with a high-quality squeegee. Backroll the material in the opposite direction of how it was squeegeed onto the surface. DO NOT TURN THE MIXING VESSEL (BUCKET) OVER ON THE FLOOR IN AN EFFORT TO UTILIZE THE ENTIRE CONTENTS.
Typical Coverage will be between 80-160 square feet per gallon. This will vary depending on the surface to which the mixed product is applied.
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.