PRIMERS AND BASE COATS
#727 ARMORPRIME UF
ULTRA FAST SETTING GENERAL PURPOSE 100% SOLIDS EPOXY PRIMER
A straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/or a base coat. ARMORPRIME ULTRA-FAST has been specifically formulated to cure very rapidly. Due to the low viscosity of this product, it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates.
ArmorPrime Ultra-Fast #727 has been designed for interior use only.
PACKAGING & COLORS
Kit sizes available are 1, 3, 15 gallons
ADVANTAGES
- Cost effective
- Extremely rapid cure formulation
- Low viscosity promotes excellent adhesion to concrete substrates
- Easy 2 to 1 mix ratio (by volume)
- Ideal for fast-track patching
- Low odor during application & cure-can be applied in occupied facilities
- VOC compliant with ALL U.S. regulations
- Can be factory or field pigmented using Thermal-Chem’s Universal Pigment
USES / APPLICATIONS
- #727 is most commonly used when ambient (air) temperatures drop below 55 Degrees F
- Used for projects that quick turnaround due to its rapid cure.
- Commonly used to be mixed with a thixotropic flour or silica to use for patching cracks and uneven surfaces.
DATA SHEET
LIMITATIONS
- Can be applied in ambient temperatures as low as 40 Degrees-F (when applied in warmer temperatures this product will cure very quickly)
- Do not apply at less than 10 mils or 160 square feet per gallon
- Do not thin this product
APPLICATION INFO
Apply #727 ArmorPrime Ultra-Fast with a squeegee, brush, or high quality non-shed roller. Only mix the amount of product that can be properly applied within 10-15 minutes. This is a rapid cure product and has both reduced working time and pot-life. Once thoroughly mixed this product should be placed on the surface and NOT LEFT IN THE MIXING BUCKET.
SURFACE PREPARATION – Apply #727 ArmorPrime Ultra-Fast only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.